{"id":2478,"date":"2026-11-18T13:41:45","date_gmt":"2026-11-18T12:41:45","guid":{"rendered":"https:\/\/www.fundicionesrioebro.com\/?p=2478"},"modified":"2026-11-18T13:54:13","modified_gmt":"2026-11-18T12:54:13","slug":"gravity-die-casting-or-shell-moulding","status":"publish","type":"post","link":"https:\/\/www.fundicionesrioebro.com\/en\/gravity-die-casting-or-shell-moulding\/","title":{"rendered":"Gravity die casting or shell moulding: choosing the right process for the part"},"content":{"rendered":"\n<p class=\"wp-block-paragraph\">Choosing between <strong>gravity die casting and shell moulding<\/strong> requires an assessment of the part&#8217;s design and the conditions under which it will be manufactured. Its geometry, internal cavities, dimensional tolerances and expected production volume all influence the decision. The machining and other operations required after casting must also be considered to achieve the finished component.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Both processes can be used to manufacture brass and bronze parts by gravity casting, but they rely on different moulding systems. Gravity die casting uses a permanent metal die that can be reused over successive production cycles. Shell moulding, on the other hand, uses a disposable mould made from resin-bonded sand. Each method has its own design and production requirements, which should be assessed before the tooling is manufactured.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Design considerations for gravity die casting and shell moulding<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">The first step is to examine the <strong>part geometry<\/strong>. Before considering production volumes or tooling costs, it is essential to check whether the part&#8217;s design is compatible with the chosen moulding process.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">With gravity die casting, the design must allow the die to open and the part to be removed once the metal has solidified. This means assessing the <strong>parting surfaces<\/strong>, where the sections of the die meet, and the <strong>direction of draw<\/strong>. Protrusions, abrupt changes in cross-section and certain internal features can make part removal more difficult.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Shell moulding offers a different way of configuring the moulding system. The mould consists of two halves made from resin-bonded sand, formed against a heated metal pattern. As the mould is disposable, its configuration allows different design solutions to be considered compared with those used in permanent metal dies.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">This does not mean that either process can accommodate every geometry. In both cases, it is necessary to assess how the mould cavity will fill, how gases will escape and how the metal will solidify. Even a relatively small design change can affect the feasibility of a particular solution.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Internal geometry and the use of cores<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Internal passages, cavities and recesses<\/strong> require particular attention. When these features cannot be formed directly by the mould configuration, <strong>cores<\/strong> are used. These are inserts that occupy the space that must remain empty inside the finished casting.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Core design has a direct influence on the process. It is necessary to determine how the cores will be positioned, which surfaces will hold them in place and how they will withstand the conditions during pouring. Their removal after solidification must also be taken into account.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">In a part with several internal passages, for example, core positioning can have a significant impact on the overall mould design. Comparing gravity die casting and shell moulding therefore involves assessing whether these elements can be incorporated into each system and how securely they will remain in position during filling.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The presence of internal cavities does not, by itself, determine which process is more suitable. The decision depends on their number, layout, dimensions and relationship with the rest of the part geometry.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Tooling and production volumes<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">The <strong>difference between a permanent and a disposable moulding system<\/strong> has direct implications for production planning.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">A metal die can be used for numerous production cycles. Its design and manufacture require an initial investment, which is spread across the parts produced over its working life. Expected production continuity and batch size are therefore important factors when assessing this option.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">With shell moulding, a new mould assembly is required for each casting. The metal pattern is reused to produce the mould halves, but these are destroyed after casting. Mould preparation is therefore part of every production cycle.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">There is no universal production volume that establishes a clear dividing line between the two processes. A proper comparison must take into account tooling complexity, production frequency, repeat orders and expected manufacturing requirements throughout the product&#8217;s life.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">An initially small batch may develop into recurring production, while a component expected to remain in production for years may undergo design changes. These circumstances should be considered before deciding how the tooling will be manufactured.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Dimensional tolerances and subsequent machining<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">The technical drawing should identify which dimensions are functionally critical and which can accommodate the variations associated with the casting process. Bearing surfaces, housings, threads and precision holes may require subsequent machining to meet the design specifications.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">These requirements must be considered from the design stage. Sufficient material needs to be left in the areas to be machined, reference surfaces must be defined and tool access must be checked. If machining requirements are only considered once the design has been finalised, difficulties may arise that require changes to the part geometry or tooling.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For this reason, <strong>casting and machining should be considered as related stages<\/strong>. The aim is to produce a casting that is suitable for subsequent operations, avoiding unnecessary machining allowances or surfaces that are difficult to machine.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">At Fundiciones R\u00edo Ebro, the in-house machining section works exclusively on parts cast at its own facilities. This allows dimensional requirements to be considered from the early stages of a project. <a href=\"https:\/\/www.fundicionesrioebro.com\/en\/machining\/\">Find out more about our machining services<\/a>.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">How design influences the choice of process<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Consider two brass components designed for a hydraulic installation. The first has a relatively simple external geometry, with a configuration that allows straightforward removal from the die and is intended for recurring production. In this situation, gravity die casting may be worth considering because the tooling can be reused over successive cycles.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The second component incorporates several internal passages and a geometry that requires careful consideration of core positioning. In this case, it is worth comparing how each process would accommodate these features and what implications this would have for manufacturing and subsequent machining.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">These are illustrative examples, not fixed selection rules. The final decision depends on the actual dimensions, functional requirements, alloys specified and production conditions.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Information needed to assess a project<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">A dimensioned technical drawing provides the information needed to examine dimensions and tolerances. The assessment becomes more complete when it is accompanied by details about the component&#8217;s function and its expected production requirements.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The following information is useful:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Technical drawing or 3D file showing the complete geometry.<\/li>\n\n\n\n<li>Specified alloy, if already defined.<\/li>\n\n\n\n<li>Initial batch size and expected production volume.<\/li>\n\n\n\n<li>Dimensional tolerances and functional surfaces.<\/li>\n\n\n\n<li>Cavities, internal passages and sealing requirements, where applicable.<\/li>\n\n\n\n<li>Machining operations or subsequent finishing requirements.<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">This information makes it possible to assess manufacturing conditions and identify potential design changes before the tooling is made. Adjusting a surface, changing the position of an internal passage or allowing for a machining operation at the design stage can simplify subsequent manufacturing steps.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Frequently asked questions about gravity die casting and shell moulding<\/h2>\n\n\n\n<h3 class=\"wp-block-heading\">Is shell moulding the same as sand casting?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Shell moulding is a type of sand casting. It uses fine sand bonded with resin, which hardens when it comes into contact with a heated metal pattern. The two resulting halves are assembled to form the mould that will receive the molten metal.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">What are cores used for in casting?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Cores are used to create cavities, passages and other internal spaces in a casting. Their position and stability must be considered when designing the moulding system.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">What machining operations might a casting require?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">This depends on the component&#8217;s functional requirements. Threads, housings, precision holes and bearing surfaces may require subsequent machining to achieve the specified dimensions. These requirements should be identified during the initial design stage so that sufficient material and access for machining tools can be provided.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Can the choice of casting process be based solely on the number of parts required?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">No. Production volume is an important factor, but it must be assessed alongside part geometry, tooling complexity, machining requirements and the expected continuity of orders.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Choosing the casting process at the design stage<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Fundiciones R\u00edo Ebro specialises in <strong>gravity die casting and shell moulding of brass and bronze parts<\/strong>. The company has its own shell core and shell moulding section, as well as gravity die casting machines, allowing it to work with both processes within its production facilities. <a href=\"https:\/\/www.fundicionesrioebro.com\/en\/foundry\/\">Find out more about our foundry services<\/a>.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">When a project is still at the design stage, a technical drawing or 3D file provides a starting point for assessing its feasibility, comparing manufacturing options and reviewing machining requirements. <a href=\"https:\/\/www.fundicionesrioebro.com\/en\/contact\/\">Contact Fundiciones R\u00edo Ebro<\/a> to discuss the technical requirements of your project.<\/p>\n","protected":false},"excerpt":{"rendered":"<p>Choosing between gravity die casting and shell moulding requires an assessment of the part&#8217;s design and the conditions under which it will be manufactured. Its geometry, internal cavities, dimensional tolerances and expected production volume all influence the decision. The machining and other operations required after casting must also be considered to achieve the finished component. [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":577,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[20],"tags":[],"class_list":["post-2478","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-technical-content"],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v28.8 - https:\/\/yoast.com\/product\/yoast-seo-wordpress\/ -->\n<title>Coquilla o c\u00e1scara: c\u00f3mo elegir el proceso de fundici\u00f3n<\/title>\n<meta name=\"description\" content=\"Diferencias entre fundici\u00f3n en coquilla y en c\u00e1scara y criterios para elegir seg\u00fan la geometr\u00eda, el utillaje y el volumen de producci\u00f3n\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.fundicionesrioebro.com\/en\/gravity-die-casting-or-shell-moulding\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Coquilla o c\u00e1scara: c\u00f3mo elegir el proceso de fundici\u00f3n\" \/>\n<meta property=\"og:description\" content=\"Diferencias entre fundici\u00f3n en coquilla y en c\u00e1scara y criterios para elegir seg\u00fan la geometr\u00eda, el utillaje y el volumen de producci\u00f3n\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.fundicionesrioebro.com\/en\/gravity-die-casting-or-shell-moulding\/\" \/>\n<meta property=\"og:site_name\" content=\"Fundiciones R\u00edo Ebro\" \/>\n<meta property=\"article:published_time\" content=\"2026-11-18T12:41:45+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2026-11-18T12:54:13+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.fundicionesrioebro.com\/wp-content\/uploads\/2019\/06\/fundiciones-rio-ebro-fundicion-cascara-03.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"640\" \/>\n\t<meta property=\"og:image:height\" content=\"480\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"RioEbroAdmin\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"RioEbroAdmin\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"8 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/www.fundicionesrioebro.com\\\/en\\\/gravity-die-casting-or-shell-moulding\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.fundicionesrioebro.com\\\/en\\\/gravity-die-casting-or-shell-moulding\\\/\"},\"author\":{\"name\":\"RioEbroAdmin\",\"@id\":\"https:\\\/\\\/www.fundicionesrioebro.com\\\/en\\\/#\\\/schema\\\/person\\\/b0a515a38646d7416e86ce21da20bfe4\"},\"headline\":\"Gravity die casting or shell moulding: choosing the right process for the part\",\"datePublished\":\"2026-11-18T12:41:45+00:00\",\"dateModified\":\"2026-11-18T12:54:13+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.fundicionesrioebro.com\\\/en\\\/gravity-die-casting-or-shell-moulding\\\/\"},\"wordCount\":1397,\"commentCount\":0,\"image\":{\"@id\":\"https:\\\/\\\/www.fundicionesrioebro.com\\\/en\\\/gravity-die-casting-or-shell-moulding\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.fundicionesrioebro.com\\\/wp-content\\\/uploads\\\/2019\\\/06\\\/fundiciones-rio-ebro-fundicion-cascara-03.jpg\",\"articleSection\":[\"Technical content\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/www.fundicionesrioebro.com\\\/en\\\/gravity-die-casting-or-shell-moulding\\\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.fundicionesrioebro.com\\\/en\\\/gravity-die-casting-or-shell-moulding\\\/\",\"url\":\"https:\\\/\\\/www.fundicionesrioebro.com\\\/en\\\/gravity-die-casting-or-shell-moulding\\\/\",\"name\":\"Coquilla o c\u00e1scara: c\u00f3mo elegir el proceso de fundici\u00f3n\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.fundicionesrioebro.com\\\/en\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.fundicionesrioebro.com\\\/en\\\/gravity-die-casting-or-shell-moulding\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/www.fundicionesrioebro.com\\\/en\\\/gravity-die-casting-or-shell-moulding\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.fundicionesrioebro.com\\\/wp-content\\\/uploads\\\/2019\\\/06\\\/fundiciones-rio-ebro-fundicion-cascara-03.jpg\",\"datePublished\":\"2026-11-18T12:41:45+00:00\",\"dateModified\":\"2026-11-18T12:54:13+00:00\",\"author\":{\"@id\":\"https:\\\/\\\/www.fundicionesrioebro.com\\\/en\\\/#\\\/schema\\\/person\\\/b0a515a38646d7416e86ce21da20bfe4\"},\"description\":\"Diferencias entre fundici\u00f3n en coquilla y en c\u00e1scara y criterios para elegir seg\u00fan la geometr\u00eda, el utillaje y el volumen de producci\u00f3n\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.fundicionesrioebro.com\\\/en\\\/gravity-die-casting-or-shell-moulding\\\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.fundicionesrioebro.com\\\/en\\\/gravity-die-casting-or-shell-moulding\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/www.fundicionesrioebro.com\\\/en\\\/gravity-die-casting-or-shell-moulding\\\/#primaryimage\",\"url\":\"https:\\\/\\\/www.fundicionesrioebro.com\\\/wp-content\\\/uploads\\\/2019\\\/06\\\/fundiciones-rio-ebro-fundicion-cascara-03.jpg\",\"contentUrl\":\"https:\\\/\\\/www.fundicionesrioebro.com\\\/wp-content\\\/uploads\\\/2019\\\/06\\\/fundiciones-rio-ebro-fundicion-cascara-03.jpg\",\"width\":640,\"height\":480},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.fundicionesrioebro.com\\\/en\\\/gravity-die-casting-or-shell-moulding\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Portada\",\"item\":\"https:\\\/\\\/www.fundicionesrioebro.com\\\/en\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Gravity die casting or shell moulding: choosing the right process for the part\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.fundicionesrioebro.com\\\/en\\\/#website\",\"url\":\"https:\\\/\\\/www.fundicionesrioebro.com\\\/en\\\/\",\"name\":\"Fundiciones R\u00edo Ebro\",\"description\":\"Fundici\u00f3n de lat\u00f3n y bronce a coquilla y c\u00e1scara\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.fundicionesrioebro.com\\\/en\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/www.fundicionesrioebro.com\\\/en\\\/#\\\/schema\\\/person\\\/b0a515a38646d7416e86ce21da20bfe4\",\"name\":\"RioEbroAdmin\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/1888d1c43e282e2a52eb8212fc927b7aec2b26d93fc1dced2063f63bb73210a0?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/1888d1c43e282e2a52eb8212fc927b7aec2b26d93fc1dced2063f63bb73210a0?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/1888d1c43e282e2a52eb8212fc927b7aec2b26d93fc1dced2063f63bb73210a0?s=96&d=mm&r=g\",\"caption\":\"RioEbroAdmin\"}}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Coquilla o c\u00e1scara: c\u00f3mo elegir el proceso de fundici\u00f3n","description":"Diferencias entre fundici\u00f3n en coquilla y en c\u00e1scara y criterios para elegir seg\u00fan la geometr\u00eda, el utillaje y el volumen de producci\u00f3n","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.fundicionesrioebro.com\/en\/gravity-die-casting-or-shell-moulding\/","og_locale":"en_US","og_type":"article","og_title":"Coquilla o c\u00e1scara: c\u00f3mo elegir el proceso de fundici\u00f3n","og_description":"Diferencias entre fundici\u00f3n en coquilla y en c\u00e1scara y criterios para elegir seg\u00fan la geometr\u00eda, el utillaje y el volumen de producci\u00f3n","og_url":"https:\/\/www.fundicionesrioebro.com\/en\/gravity-die-casting-or-shell-moulding\/","og_site_name":"Fundiciones R\u00edo Ebro","article_published_time":"2026-11-18T12:41:45+00:00","article_modified_time":"2026-11-18T12:54:13+00:00","og_image":[{"width":640,"height":480,"url":"https:\/\/www.fundicionesrioebro.com\/wp-content\/uploads\/2019\/06\/fundiciones-rio-ebro-fundicion-cascara-03.jpg","type":"image\/jpeg"}],"author":"RioEbroAdmin","twitter_card":"summary_large_image","twitter_misc":{"Written by":"RioEbroAdmin","Est. reading time":"8 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.fundicionesrioebro.com\/en\/gravity-die-casting-or-shell-moulding\/#article","isPartOf":{"@id":"https:\/\/www.fundicionesrioebro.com\/en\/gravity-die-casting-or-shell-moulding\/"},"author":{"name":"RioEbroAdmin","@id":"https:\/\/www.fundicionesrioebro.com\/en\/#\/schema\/person\/b0a515a38646d7416e86ce21da20bfe4"},"headline":"Gravity die casting or shell moulding: choosing the right process for the part","datePublished":"2026-11-18T12:41:45+00:00","dateModified":"2026-11-18T12:54:13+00:00","mainEntityOfPage":{"@id":"https:\/\/www.fundicionesrioebro.com\/en\/gravity-die-casting-or-shell-moulding\/"},"wordCount":1397,"commentCount":0,"image":{"@id":"https:\/\/www.fundicionesrioebro.com\/en\/gravity-die-casting-or-shell-moulding\/#primaryimage"},"thumbnailUrl":"https:\/\/www.fundicionesrioebro.com\/wp-content\/uploads\/2019\/06\/fundiciones-rio-ebro-fundicion-cascara-03.jpg","articleSection":["Technical content"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/www.fundicionesrioebro.com\/en\/gravity-die-casting-or-shell-moulding\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/www.fundicionesrioebro.com\/en\/gravity-die-casting-or-shell-moulding\/","url":"https:\/\/www.fundicionesrioebro.com\/en\/gravity-die-casting-or-shell-moulding\/","name":"Coquilla o c\u00e1scara: c\u00f3mo elegir el proceso de fundici\u00f3n","isPartOf":{"@id":"https:\/\/www.fundicionesrioebro.com\/en\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.fundicionesrioebro.com\/en\/gravity-die-casting-or-shell-moulding\/#primaryimage"},"image":{"@id":"https:\/\/www.fundicionesrioebro.com\/en\/gravity-die-casting-or-shell-moulding\/#primaryimage"},"thumbnailUrl":"https:\/\/www.fundicionesrioebro.com\/wp-content\/uploads\/2019\/06\/fundiciones-rio-ebro-fundicion-cascara-03.jpg","datePublished":"2026-11-18T12:41:45+00:00","dateModified":"2026-11-18T12:54:13+00:00","author":{"@id":"https:\/\/www.fundicionesrioebro.com\/en\/#\/schema\/person\/b0a515a38646d7416e86ce21da20bfe4"},"description":"Diferencias entre fundici\u00f3n en coquilla y en c\u00e1scara y criterios para elegir seg\u00fan la geometr\u00eda, el utillaje y el volumen de producci\u00f3n","breadcrumb":{"@id":"https:\/\/www.fundicionesrioebro.com\/en\/gravity-die-casting-or-shell-moulding\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.fundicionesrioebro.com\/en\/gravity-die-casting-or-shell-moulding\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.fundicionesrioebro.com\/en\/gravity-die-casting-or-shell-moulding\/#primaryimage","url":"https:\/\/www.fundicionesrioebro.com\/wp-content\/uploads\/2019\/06\/fundiciones-rio-ebro-fundicion-cascara-03.jpg","contentUrl":"https:\/\/www.fundicionesrioebro.com\/wp-content\/uploads\/2019\/06\/fundiciones-rio-ebro-fundicion-cascara-03.jpg","width":640,"height":480},{"@type":"BreadcrumbList","@id":"https:\/\/www.fundicionesrioebro.com\/en\/gravity-die-casting-or-shell-moulding\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Portada","item":"https:\/\/www.fundicionesrioebro.com\/en\/"},{"@type":"ListItem","position":2,"name":"Gravity die casting or shell moulding: choosing the right process for the part"}]},{"@type":"WebSite","@id":"https:\/\/www.fundicionesrioebro.com\/en\/#website","url":"https:\/\/www.fundicionesrioebro.com\/en\/","name":"Fundiciones R\u00edo Ebro","description":"Fundici\u00f3n de lat\u00f3n y bronce a coquilla y c\u00e1scara","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.fundicionesrioebro.com\/en\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Person","@id":"https:\/\/www.fundicionesrioebro.com\/en\/#\/schema\/person\/b0a515a38646d7416e86ce21da20bfe4","name":"RioEbroAdmin","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/secure.gravatar.com\/avatar\/1888d1c43e282e2a52eb8212fc927b7aec2b26d93fc1dced2063f63bb73210a0?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/1888d1c43e282e2a52eb8212fc927b7aec2b26d93fc1dced2063f63bb73210a0?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/1888d1c43e282e2a52eb8212fc927b7aec2b26d93fc1dced2063f63bb73210a0?s=96&d=mm&r=g","caption":"RioEbroAdmin"}}]}},"_links":{"self":[{"href":"https:\/\/www.fundicionesrioebro.com\/en\/wp-json\/wp\/v2\/posts\/2478","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.fundicionesrioebro.com\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.fundicionesrioebro.com\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.fundicionesrioebro.com\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.fundicionesrioebro.com\/en\/wp-json\/wp\/v2\/comments?post=2478"}],"version-history":[{"count":2,"href":"https:\/\/www.fundicionesrioebro.com\/en\/wp-json\/wp\/v2\/posts\/2478\/revisions"}],"predecessor-version":[{"id":2480,"href":"https:\/\/www.fundicionesrioebro.com\/en\/wp-json\/wp\/v2\/posts\/2478\/revisions\/2480"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.fundicionesrioebro.com\/en\/wp-json\/wp\/v2\/media\/577"}],"wp:attachment":[{"href":"https:\/\/www.fundicionesrioebro.com\/en\/wp-json\/wp\/v2\/media?parent=2478"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.fundicionesrioebro.com\/en\/wp-json\/wp\/v2\/categories?post=2478"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.fundicionesrioebro.com\/en\/wp-json\/wp\/v2\/tags?post=2478"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}